Nox_adb コマンド一覧



-d – directs command to the only connected USB device
returns an error if more than one USB device is present.
-e – directs command to the only running emulator.
returns an error if more than one emulator is running.
-s – directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p – simple product name like ‘sooner’, or
a relative/absolute path to a product
out directory like ‘out/target/product/sooner’.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] – list all connected devices
(‘-l’ will also list device qualifiers)
connect [:] – connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [[:]] – disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.

device commands:
adb push – copy file/dir to device
adb pull [] – copy file/dir from device
adb sync [ ] – copy host->device only if changed
(-l means list but don’t copy)
(see ‘adb help all’)
adb shell – run remote shell interactively
adb shell – run remote shell command
adb emu – run emulator console command
adb logcat [ ] – View device log
adb forward – forward socket connections
forward specs are one of:
jdwp: (remote only)
adb jdwp – list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [–algo –key –iv ]
– push this package file to the device and install it
(‘-l’ means forward-lock the app)
(‘-r’ means reinstall the app, keeping its data)
(‘-s’ means install on SD card instead of internal storage)
(‘–algo’, ‘–key’, and ‘–iv’ mean the file is encrypted already)
adb uninstall [-k] – remove this app package from the device
(‘-k’ means keep the data and cache directories)
adb bugreport – return all information from the device
that should be included in a bug report.

adb backup [-f ] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] []
– write an archive of the device’s data to .
If no -f option is supplied then the data is written
to “backup.ab” in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device’s
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
( is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)

adb restore – restore device contents from the backup archive

adb help – show this help message
adb version – show version num

adb wait-for-device – block until device is online
adb start-server – ensure that there is a server running
adb kill-server – kill the server if it is running
adb get-state – prints: offline | bootloader | device
adb get-serialno – prints:
adb get-devpath – prints:
adb status-window – continuously print device status for a specified device
adb remount – remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] – reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader – reboots the device into the bootloader
adb root – restarts the adbd daemon with root permissions
adb usb – restarts the adbd daemon listening on USB
adb tcpip – restarts the adbd daemon listening on TCP on the specified port
adb ppp [parameters] – Run PPP over USB.
Note: you should not automatically start a PPP connection.
refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] – Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ ]
can be interpreted in several ways:

– If is not specified, both /system and /data partitions will be updated.

– If it is “system” or “data”, only the corresponding partition
is updated.

environmental variables:
ADB_TRACE – Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL – The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS – When used with the logcat option, only these debug tags are printed.

  • このエントリーをはてなブックマークに追加